Batteries are a bit of a mystery to people. They are not quite an electronic, so you dont have to program the time on them. However, they all have strange markings on them that battery manufactures expect you to understand. For instance, C Rating is found on most Li-PO battery packs. Typically it will look will something like 20C or 20C – 30C. So what does it mean? Watch the video below or read on for the explanation.
C Rating Background
C Rate is derived from Coulomb’s Law developed by French physicist Charles Augustin de Coulomb. The c-rate is the governing measurement of what current a battery is charged or discharged at. For example, the posted mAh of the battery is the 1C rating. If a battery is labeled 2000mAh, then its 1C rating is 2000mAh.
To make this simple, the battery should provide 1C current for one hour. In our example above that would be 2000mAh or 2A of current for one hour. The same applies for a 0.5C rating. Again using the 2000mAh battery, it would deliver 1000mAh or 1A of current for two hours.
Battery C Rating Examples
The formulas for the example are simple. If for any reason I have not made it clear, comment for further explanation. The following examples are based on the first line in the table. 1600mAh battery with a 10C rating.
Continuous Discharge
(mAh / 1000) x C Rate = Continuous Discharge Amperage
(1600 / 1000) x 10 = 16A
Run Time for Safe Continuous Discharge
60mins / C-Rate = Run Time
60mins / 10C = Discharge 16A for 6mins
The 3500mAh battery will produce a higher continuous discharge than the 5000mAh battery. However, the 5000mAh battery will deliver its current 33% longer than the 3500mah battery. So which result is more important to your application. Longer run time or higher continuous amperage discharge.
>>>>>>>>>>>>>>>>>>>>Laptop Battery
>>>>>>>>>>>>>>>>>>>>Tablet Battery
>>>>>>>>>>>>>>>>>>>>Smartphone Battery
Comments